1/2 thick Solid Wood Floor T-Molding

Heritage Mill Oak Golden 3/4 in. Thick x 2-1/4 in. W x 78 in. L Hardwood Lipover Reducer Molding Hardwood Trim LM7008 - The Home Depot

White oak construction gives strength and beauty to the 6 ft. 6 in. x 2 in. x 1/2 in. The Molding is designed for nail-down installation over wood subfloors. Pre-drill nail holes to help prevent splitting.

Bruce Flooring 0.25 x 2 x 78 White Oak T-Molding in Sierra

How to Install: T-Molding

Flexco Oak 0.56-in T x 2-in W x 78-in L Solid Wood Reducer in the Floor Moulding & Trim department at

Fits 1-1/2 Inch thick panels. Requiers a 5/64 Inch Kerf (Slot for the tang) Produced from tough, flexible Polyethylene that will contour to curved

Outwater Plastic T-molding 1-1/2 Inch Natural Oak Woodgrain Flexible Polyethylene Off-Set Barb Tee Moulding 250 Foot Coil

Create a polished look for your flooring installation with our 1/2 thick x 2 wide x 78 long Solid Wood Floor T-Molding. This versatile molding is

Whisper - T-Molding

Wood 0.31 Thick x 2 Wide x 78 Length T-Molding Artistic Finishes Color: Bruce Hardwood Floors/Smokey Ash - Yahoo Shopping

Join carpet to tile floors with Johnsonite CE-XX-C T-Molding. 1 5/16 wide with a 1/2 leg. Intended for 1/2 carpet transitioning to 1/4 or 3/8 flooring. Sold in 12 foot sections. 30 colors available.

Johnsonite CE-XX-C T-Molding - Transition for 1/2 Carpet or 5/16 to 1/8 Flooring

Islander Flooring

Bruce Paprika Sand Hickory 1/2 in. Thick x 2 in. Wide x 78 in. Length T-Molding, Dark TM0HC92H

Wood Floors Plus > Solid Oak > Clearance Solid Hardwood CB924 Oak Gunstock 3/4 inch x 2 1/4 inch 20 sf/ctn CABIN GRADE

TMolding is used as a transition between two hard surface floors of equal height. A t-mold may be used to bridge wood floor and ceramic tile.

Mullican 26074 Nordic Naturals 78 inch x 2 inch Engineered Hardwood and Solid Hardwood Nail Down, Size: One size, Stockholm

T-Moldings are transitions that cover the narrow gap between 2 floors of the same height. These are made of the finest hardwood product. All prefinished products are coated with an environmentally-friendly water-based low VOC polyurethane coating. It is vacuum-coat applied and UV-cured with gloss levels made to specifications, each piece receives a minimum of 2 coats. Our multiple, state-of-the-art finish systems allow us to be flexible and yet responsive to short lead times.

Roppe Cornish 0.28 in. Thick x 2 in. Wide x 78 in. Length Wood T-Molding, Light HTM0089

Tile-to-Wood Floor Transition Strips